1. When the handset LCD screen prompts
“Press base paging 2s then press Reg.”, long press the Wireless button

on the base station until the registration LED flashes.
2. Press the
Reg soft key on the handset to register quickly.
1. When the handset LCD screen prompts
“Press base paging 2s then press Reg.”, long press the Wireless button

on the base station until the registration LED flashes.
2. Press the
OK soft key on the handset.
3. Select
Register Handset.
4. Select the desired base and then press the
OK soft key. The handset begins searching the base.
5. Press the
OK soft key after searching a base successfully.
6. Enter the base PIN (default: 0000), and then press the
Done soft key to complete registration.
NOTE: You can also press the
OK key to enter the main menu, and then select
Settings >
Registration >
Register Handset and repeat steps 2-4 to register multiple base stations.
After the success of registration, the handset LCD screen prompts “Handset Subscribed” and “Base NO. (The last 4 characters of connected Base’s MAC address)”. If the handset LCD screen prompts “Searching for Base”, please check if your base station is powered on.
Assisted Provisioning | Yealink Phones