06/21/18 16:58 PM  

Deskphones - Cisco Phones | Adjusting Call Volume and Using Mute | SPA514G/508G/303/525G/525G2 | RingCentral

« Go Back


SummaryCisco phones allow you to adjust the call volume during an ongoing call. These desk phones let you mute or unmute the handset, headset, and speakerphone microphone during calls or conferences.

Cisco SPA514G/508G/303/525G/525G2 - Adjusting Call Volume and Using Mute

Adjusting the Call Volume
Using Mute

Adjusting the Call Volume

If the sound in your handset, headset, or speakerphone is too loud or soft, the call volume can be adjusted while you are on a call.

NOTE: Changing the volume during a call only affects the speaker you are using at a time. For example, when the volume was adjusted when you are using the headset, the handset volume will not be changed.

1. Lift the handset or press the Speaker button.

 Speaker button

2. Press (+) on the Volume button to increase the volume or press (-) to decrease the volume. 

3. Press Set or Save.

Using Mute

To mute the phone microphone, speaker, or headset microphone, press the Mute button on the phone.  The button will illuminate red. Press the Mute button again to unmute.

 Mute button

If no audio device is ON, pressing the Mute key has no effect. When switching from the speakerphone to the handset, mute is turned OFF automatically.

See Also

Using Cisco IP Phones

Was this information helpful?

Tell us why and what can we do to improve this information